The Ultimate Guide to Basic Typography

Learn the essential terms in the world of typography. In this article, we’ll clarify a few misused terms, touch on figures and symbols, and explain some indispensable typesetting terminology.

In the world of typography and design, there are innumerable terms that are necessary for beginner designers to know. A few of these terms are widely confused and misused. In this Ultimate Guide to Basic Typography, I’ve gathered some essential terms you need to know. I’ll go through some of the basic misunderstood terms, like the difference between typeface and font. I’ll also touch on the different font file types, explain the different type of figures and symbols, and explain some essential typesetting details. 

Typeface vs. Font

One of the most common mistakes when talking about type is mixing up the terms “typeface” and “font”. The distinction between these terms can be slightly confusing, so let’s talk about their different meanings. 

A typeface is a group of characters that share a common DNA. For example, Alegreya Sans is a different typeface from Rockwell Std. 

A font is a particular set of glyphs within a typeface. For instance, 12 pt Franklin Gothic URW Light is a different font from 14 pt Franklin Gothic URW Light. You’d use the same definition if you are talking about different weights—12 pt Franklin Gothic URW Light is different from 18 pt Franklin Gothic URW Book.

For many centuries, text was set individually by hand, and each letter would be a small piece of cast metal. Each letter was stored in a wooden type drawer that was organized in small compartments. A specific type drawer would have a full alphabet and other glyphs at the same size. Therefore, the term “font” had a very specific meaning, distinct from the word “typeface.”

Nowadays, these two words are often used interchangeably, but it’s always good to know the distinctions between the two. A great analogy is the one of albums and songs. Typefaces are the different albums, and fonts are the songs in the album.

Typeface and font differences

Font Styles

When type was first invented, all fonts were designed as roman. It wasn’t until the early 16th century that italic fonts were introduced. Originating in Italy, italics were a separate group in the type classification, similar to serifs and sans serifs. By the early 18th century, foundries started pairing roman and italic designs. Italics are used to emphasize important points in a text block. 

  • Italics or true italics are angled typefaces that are strongly influenced by calligraphy. Their slanted anatomy mimics the organic movement of cursive letters. Italics that are specifically designed for their matching roman fonts are similar in shape, with the exception of a few characters. Lowercase characters like the a, f and g tend to change in form considerably when designed as italics. 
  • Oblique fonts are less calligraphic in style compared to italics. None of the glyphs in oblique fonts go through a cursive transformation. Some glyphs can be slightly slanted, while others go through rigorous corrections to maintain the same style as their roman counterparts. When included in a block of text, oblique fonts don’t contrast enough with their roman counterparts. 
Font Styles

Font Weights

Morris Fuller Benton was a proponent of the creation of large type families between the late 19th and early 20th centuries. The idea was that the characters within the family would share a common DNA, with slight distinctions. 

The most common font weights you can find in a typeface are Regular and Bold. Some typefaces like Neue Haas Unica include extensive weights. This typeface includes multiple weights like ultra light, thin, light, regular, medium, bold, heavy, black, and extra black. The advantage of having such a wide range of weights in a single font is the ability to create a hierarchy in a page layout.

font weights

Font File Types

Let’s be real: when you download and install a font, you are left wondering if you’ve used the right file. We’ve all been there and questioned what the real difference is between the files. So let’s talk font file types:

  • PostScript (.pfb, .pfm, .lwfn, .ffil) files were developed by Adobe in the mid 1980s. A computer would need two separate files: one for on-screen display and a second one for printing. The PostScript file is not cross-platform—different files were needed for Mac and Windows computers. This became an issue when handling files on different operating systems. The file could hold a maximum of 220 glyphs.
  • TrueType Font (.ttf) files were developed by both Apple and Microsoft in the early 1990s. This type of file renders the outlines of each character through a hinting process to achieve a high level of legibility on low-res devices. Incorporating hinting into the font became time-consuming, and not all fonts take advantage of the technology. A single file contains on-screen and printing data and up to 65,000 glyphs.
  • OpenType Font (.otf) files were developed by Adobe and Microsoft in the late 1990s. These fonts support Unicode, meaning that one OpenType file can contain more than 65,000 glyphs. Previously, typefaces with multiple languages would have had a separate file—OpenType fonts can house them all in a single file, including swashes, numeral styles, pictograms, and more. This type of file is cross-platform: the same file can be used for Mac and Windows computers.
Font file types

Figures, Signs, and Symbols

Old Style, Lining, Proportional, and Tabular Figures

You might have noticed that some numbers are differently set from typeface to typeface. Each number style has a specific use that can make designing easier. Lining and old style figures have different baseline alignments. Tabular and proportional figures have different widths, and if they are used on multiple lines, the numbers might not align. Let’s take a look at the different figure styles and when should you use them:

  • Lining Figures are usually the default figures you’d find in a typeface. The numbers sit on the same baseline as the rest of the characters. These figures look great next to capital letters because the height tends to be similar if not the same.
  • Old Style Figures or non-lining are numbers that extend above and below the baseline—similar to ascenders and descenders in letters. This style looks great if you are using it in a paragraph of text. Visually, the varying height blends in nicely with uppercase and lowercase letters. 
Lining and old style figures
  • Tabular Figures have a set width, similar to monospaced fonts. This figure style is perfect if you are planning on typesetting tables, charts, or numbered lists as they’ll align vertically without the need to kern. Avoid using this style for blocks of text as the even width will be seen as poorly kerned figures.
  • Proportional Figures are the opposite of tabular—these numbers have different widths depending on their shape. Therefore, the numbers don’t align vertically. Use this style of figures in body text as they blend in organically for readers.
Tabular and proportional figures

Superscript and Subscript

Superscript and subscript figures are smaller versions of full-size numerals. They’re commonly used in footnotes and endnotes, cents in pricing, diagonal fractions, and chemical notations. These figures aren’t always included in a typeface, but software like InDesign has the option to create a fake figure. Properly designed figures have been drawn to have a harmonious visual relation in terms of weight and proportions.

  • Superscripts or superior figures can be cap-aligned (mainly used for standard numerators) or go slightly above (for mathematical formulas). Some typefaces will include both of these or just one.
  • Subscripts or inferior figures can be baseline-aligned (used for denominators) or sit below the baseline (for chemical formulas).
Superscript and subscripts

Small Caps

Small caps are uppercase letterforms that are shorter than regular capital letters. They are often around the same height as lowercase letters or slightly taller, so they look visually harmonious. If you are looking to highlight text instead of using bold or italics, you can use small caps.

Unfortunately, many small caps nowadays are computer generated, so pay close attention when using small caps. Well-designed small caps have been drawn specifically to complement the weight and proportion of the letter. Avoid using the Small Caps button in InDesign as it will only be a proportionally reduced form of a capital letter. These tend to look too light, poorly spaced, and narrow.

Small caps

Ligatures: Standard and Discretionary

You might have come across these stylish characters before and not noticed it. The word “ligatures” comes from the Latin ligare, meaning to tie. Ligatures tie two or more letters into a single character to help with kerning or for decorative purposes. Let’s look at the details:

  • Standard ligatures help with the kerning when some characters take over the horizontal space of the next. For instance, the letter f tends to take over the space because of its hanging terminal. The overlap increases to both sides with italic fonts. Typical English ligatures include letter combinations such as fi, fl, ffi, and ffl. Depending on the language, ligatures can be different. 
  • Discretionary or decorative ligatures don’t necessarily help with the kerning but are stylistic features of a typeface. This style of ligature has a calligraphic appearance and can add personality to characters. Letter combinations like ct, sp, and st have a specific connecting style between the characters.
Ligatures

Hyphens and Dashes

Hyphens and dashes are punctuation marks that are often misunderstood and misused. While they look very similar, the distinct length serves specific functions. These three characters are horizontal strokes that can have specific characteristics to match a typeface.

  • The hyphen is a short mark used to hyphenate a word or at the end of a line to break a word. Hyphens are commonly used to separate digits in phone numbers or to join compound words, such as “long-term”. 
  • The en dash is longer than a hyphen, and the width usually matches the one of the capital N. It is used to indicate a duration of time, often replacing the prepositions “to” or “through”. 
  • The em dash is the longest dash, and the length usually matches the one of a capital M. It is often used in place of commas, parentheses, or colons. Em dashes are also used to indicate a strong break in the structure of a sentence or a change of thought or emphasis. Typewriters don’t include the em dash—only hyphens—so some writers have used two hyphens instead of an em dash. Note that this is typographically incorrect. 
Hyphens and dashes

Ampersand

One of the fanciest characters in a typeface is the ampersand. This symbol is a stylized depiction of “et”, which is Latin for “and”. Designers often use the opportunity to design ampersands as a way to show off as it can be a symbol that contains lots of character and personality. You can substitute the word “and” for an ampersand in certain instances: headlines, titles and branding or for connecting words in a list. Try to use it sparingly or not at all in copy text as it can appear larger next to normal copy. 

Ampersand

Legal Symbols (™ ® ©)

Trademark, register, and copyright are important symbols to use when you are designing a brand identity. They help protect creative work against plagiarism. Visually, these symbols are often used at a small size to look clean but modest as they accompany a logo.

Designers prefer to use serif symbols with serif fonts and sans symbols with sans logos. It is acceptable to use a sans symbol with a serif logo as it can read better at a smaller point size.

If you are using the ™ or ® symbol in text size, set it to less than half of the x-height of the text. As the text gets larger, the symbols should decrease in size for a clean look. For the © symbol, match it to the x-height or cap height of the text. 

Legal symbols trademark register and copyright

Detailed Typography

Legibility

Legibility refers to the anatomy of a typeface and the common DNA the characters share. It is related to a reader’s ability to differentiate one letter from the next. There are multiple elements that contribute to a legible typeface, such as x-height, character width, weight, counters, serifs, stroke contrast, etc. 

Legibility

Readability

Readability refers to how clear and easy it is to read words in a block of text. Many designers spend years mastering the art of typesetting as it helps shape the page in a cohesive and clear manner. Typesetting is very detail oriented, and there should be a mix of legibility and readability considerations. Depending on the DNA of a typeface, designers can make decisions for its readability on a page. Font size, line length, and leading, just to name a few, are some of the elements that need to be considered to make text legible.

Readability

Size

12 pt font has become the norm when creating a document. Unfortunately, it is not the most comfortable size to read for long forms of text. Many books, periodicals and magazines are printed at less than 12 pt. This is not only for aesthetic purposes—it can also get costly to print at that size. 

While every typeface looks different at 12 pt, try printing it out and reading it. Size it down to 10 pt—it might not seem much, but copy text can look elegant at this size. Don’t be afraid to go up or down by 0.25 pt or 0.5 pt as it can make a big difference. It’s all in the details. Depending on what the end product is, you might need to adjust. For instance, business cards are usually set at 7 or 8 pt. 

Size

Line Length

Line length is the width of a column where type is set, and it’s usually measured by the number of characters on a single line. 

Depending on the size of the copy text, a readable line length can vary. For copy text, a line length of between 45 and 75 characters is optimal. As you increase the point size of a font, you’ll need to increase the line length. Narrower lines are suitable for short copy as the reader’s eyes won’t need to travel far to the beginning of the next line. For long forms of text, go for wider columns, so that readers won’t need to jump to the following line as often.

Line length

Leading

Leading, also called line spacing, is the vertical space between each line of text and is measured from baseline to baseline. 

Depending on the typeface you are using, you might need more or less leading. Darker typefaces need more leading because they tend to make a page look darker and require more breathing room. As a rule of thumb, add 2 pt to the final size of the copy text. Keep an eye on ascenders and descenders as they can often touch between the lines.

Leading

Tracking

Also known as letter spacing, tracking is the act of adding horizontal space between characters. Lowercase characters require some tracking in long forms of text to fix rags, orphans, and widows. Strings of capital letters need tracking to add some air between the characters. There isn’t a rule as to how much tracking you should add, but try to find a good balance.

Tracking

Kerning

Whereas tracking is the space between characters in a word, kerning is the space between a combination of two characters. 

Most typefaces are integrated with kerned pairs that are created carefully by a designer. There are many different combinations, so some are not kerned by default. There’s no mathematical rule for kerning—your eyes are your best tool. The goal of kerning is to achieve equal distance between the pair so that the full word looks evenly spaced. Characters with diagonal strokes are difficult to kern because of the space they create.

Kerning

Typographic Alignment

Typographic alignment refers to the text placement on a page, and it is one of the first decisions you’ll make at the beginning of a project. Each alignment style has different applications and its own challenges to make the text readable. 

The four main alignment styles are:

  • Flush Left: If you are typesetting large amounts of text, flush left is a great option for languages that are read from left to right. Try using hyphenation to achieve a pleasantly uneven rag on the right side (more on rags in the next section).
  • Center Align: Use center align for shorter amounts of text, like headlines, formal invitations, and introductory copy. Avoid using this style for long copy as it can become difficult to read due to the uneven edges.
  • Flush Right: Flush right is common in languages that read right to left, like Hebrew and Persian. Use this style for a few lines at a time and when necessary (pull quotes, sidebars, and notes). 
  • Justified: Justified text is aligned to both sides simultaneously. This style is most common in books and newspapers, mainly to save space and fit as many characters as possible on one line. Use hyphenation with this style to avoid wide gaps between words. 
Typographic alignment

Rags and Rivers

The uneven edge on the opposite side of a flush left (ragged right), flush right (ragged left) or center aligned text is called “rag”. When setting type, pay attention to the ragged edge shapes as they sometimes can be distracting if not set properly. You can correct rags manually by breaking lines where necessary or hyphenating words. A good rag goes in and out in small increments. 

Rags

Rivers are big gaps between words, usually caused by justified text. Use a combination of tracking and hyphenation where needed to eliminate rivers. A slightly tighter tracking will allow you to fit more characters on a line, while the hyphenation option will break words where necessary.

Rivers

Orphans and Widows

Orphans are isolated lines created when a paragraph begins on the last line of a column or page. A widow is the last line of a paragraph that appears at the beginning of the next column or page.

Both of these issues cause excessive white space around the lines of text. To eliminate this problem, edit copy where necessary. If editing is not an option, try typesetting previous paragraphs meticulously. Typography is all about the details, and it’s important to create a good reading experience within a clean and organized layout.

Orphans and widows

That’s It!

In this article, we’ve shown you the most essential typographic terms. We clarified a few regularly misused words, touched on figures and symbols, and explained some indispensable typesetting terms. 

It’s important to learn the do’s and don’ts of typography. You’ll understand why some typefaces work at a small point size or why text is readable in a wide column. While this guide contains rules, I think rules were made to be broken, so experiment outside the box. Once you’ve mastered, practiced and applied the basics, I encourage you to get crazy and explore new horizons!

{excerpt}
Read More

How to Create an Animated Polaroid Effect Photoshop Template

What You’ll Be Creating

In this tutorial, we’ll not only create a polaroid effect Photoshop template using photo filters and shapes, but we’ll also create animated photo effects with standard Photoshop tools.

I created Animated Polaroid Slideshow Instagram Stories Template using the same methods for my GraphicRiver portfolio.

httpsgraphicrivernetitemanimated-polaroid-slideshow-instagram-stories23822362

Tutorial Assets

The following assets were used during the production of this tutorial:

1. How to Prepare the Document

Step 1

Use Control-N to create a new document and use the following settings: 

  • 1080 x 1920 px
  • 300 dpi
Creating a new document

Step 2

Go to File > Place and put the first image inside the document.

Placing the first image

Step 3

Resize your image to the borders of the document and click Enter.

Resizing the image to the borders

Step 4

After that, place the second image as we did before.

Placing the second image

Step 5

Click M to activate the Rectangular Marquee Tool and select the whole canvas of the document.

Selecting the canvas of the document

Step 6

Select both layers and then go to Image > Crop to delete the parts of the photo outside the canvas.

Cropping the images

Step 7

Right-Click on the first layer and then click Convert to Smart Object.

Converting the layer to the smart object

Step 8

After that, convert the second image into a smart object, as we did before.

Converting the second image into the smart object

Step 9

Rename the layers to “Placeholder 01” and “Placeholder 02”.

Renaming the layers

Step 10

Create duplicates of your smart objects using Right-Click > Duplicate.

Creating the duplicates of the smart objects

Step 11

Make the placeholders Invisible.

Making the layers invisible

Step 12

Move the placeholders to the top of the Layers panel.

Moving the smart objects

Step 13

Now we need to resize the photos. Select the “Photo 01” layer and then hit Control-T and change the Width and Height to 85%.

Resizing the first image

Step 14

Resize the second layer as we just did before.

Resizing the second image

Step 15

Select the background layer and then hit Shift-F5 and use the following settings: 

  • Contents: Color 
  • Color: #141414
Filling the background with the color

Step 16

Double-Click on the first photo layer and select the Stroke parameter. Use the following settings: 

  • Size: 10 px 
  • Position: Outside
  • Color: #fef3d5
Creating a layer style for the first image

Step 17

Add the same stroke parameter to the second image in the Layer Style panel.

Creating a layer style for the second image

2. How to Create the Polaroid Stripes

Step 1

Now let’s create the first element of our stripe. Hit U to create Rectangle Shape and use the following settings: 

  • Width: 120
  • Height: 90
Creating the first shape of the polaroid stripe

Step 2

Select the shape and move it 20 px down and 15 px to the right from the top-left corner.

Moving the shape

Step 3

Create a duplicate of the shape and move it 200 px to the right while holding Shift.

Moving the duplicate of the shape

Step 4

Now we need to create 18 more duplicates of the shapes and place them the same distance from each other.

Creating duplicates of the shape

Step 5

Select all the shapes while holding Shift in the Layers panel and then Right Click > Merge Shapes.

Merging the shapes

Step 6

After that, create a duplicate of your new shape and move it 1800 px down while holding Shift.

Moving the duplicate of the shape

Step 7

Now we need to merge our new shape into one, as we did before, and then Double Click on the layer and select the Color Overlay parameter. Use the following settings: 

  • Blend Mode: 
  • Normal Color: #fef1cf
Overlaying the shape with the color

Step 8

Go to Outer Glow and choose the following settings: 

  • Blend mode: Screen
  • Opacity: 100%
  • Color: #fef1cf 
  • Spread: 10%
  • Size: 10 px
Creating the outer glow of the shape

3. How to Create a Vintage Photo Photoshop Effect

Step 1

To create a vintage photo effect, let’s add color correction to our document using the curves image filter. Go to Layer > New Adjustment Layer > Curves.

Creating the first adjustment layer

Step 2

Create a duplicate of the curves layer.

Creating a duplicate of the curves

Step 3

Double click on the first curves layer icon in the Layers panel and use the following settings:

Creating the curves color correction

Step 4

After that, choose the following settings for the second curves layer:

Creating the curves color correction

Step 5

Change the Opacity of the first curves layer to 25%.

Changing the opacity of the layer

Step 6

Change the Opacity of the second curves layer to 50%.

Changing the opacity of the layer

This is how our image will look after adding all the Photoshop effects listed above:

How image should look after adding all the effects

4. How to Create an Animated Polaroid Effect in Photoshop

Step 1

Select the first two photos and move them 1010 px to the right while holding Shift, so that they go outside the canvas of the document.

Moving the layers outside the canvas

Step 2

Go to Window > Timeline and click on Create Video Timeline.

Creating a timeline

Step 3

Now you need to create the first keyframe. Select the first photo and then click on the Keyframe icon near Transform to create the first Keyframe.

Creating first keyframe

Step 4

Move the Time Indicator to 0:00:01:00 and then move the photo 1010 px to the left while holding Shift.

Creating the second frame

Step 5

Move the Time Indicator to 0:00:02:00 and hit the Keyframe icon to create another keyframe.

Creating the stop frame

Step 6

Move the Time Indicator to 0:00:03:00 and then move the photo 1010 px to the left while holding Shift.

Creating the animation

Step 7

Select the second photo, and then move the Time Indicator to 0:00:02:00 and hit the Keyframe icon to create the first keyframe for our second image.

Creating the first keyframe for the second image

Step 8

Move the Time Indicator to 0:00:03:00 and then move the second photo 1010 px to the left while holding Shift.

Creating the second keyframe for the second image

Step 9

Move the Time Indicator to 0:00:04:00 and hit the Keyframe icon to create the first keyframe for our second image.

Creating the stop keyframe

Step 10

Move the Time Indicator to 0:00:05:00, and then move the second photo 1010 px to the left while holding Shift.

Creating the last keyframe for the second image

Step 11

Now let’s create the animation for our shapes. Select the shape layer and then Right-Click > Convert to Smart Object.

Converting shape into the smart object

Step 12

Hit Control-T and change the Width to 94.45%.

Changing the size of the shape

Step 13

Select the shape layer and move the Time Indicator to 0:00:01:00. Then click on the Keyframe icon.

Creating the first keyframe of the shape animation

Step 14

Move the Time Indicator to 0:00:01:00 and then move the shape 755 px to the left while holding Shift.

Creating the second keyframe for the shape layer

Step 15

Move the Time Indicator to 0:00:02:00 and hit the Keyframe icon.

Creating the stop keyframe for the shape layer

Step 16

Move the Time Indicator to 0:00:03:00 and then move the shape 755 px to the left while holding Shift.

Creating the keyframe for the shape layer

Step 17

Move the Time Indicator to 0:00:04:00 and click on the Keyframe icon.

Creating the second stop keyframe for the shape layer

Step 18

Move the Time Indicator to 0:00:05:00 and then move the shape 755 px to the left while holding Shift.

Creating the last keyframe for the shape layer

Step 19

Our animation is almost ready, so now let’s create a fade in/fade out effect to make it look smoother. Create a new layer using Shift-Control-N and then Fill it with any color. 

Creating the new layer

Step 20

Change the Fill option of the layer to 0%.

Changing the fill of the layer

Step 21

Go to the timeline panel and hit the Transitions button. After that, drag and drop the Fade With Black transition to the start and end of the layer.

Creating the fade effect

Step 22

Right-Click on the transitions and change the duration to 0.5.

Changing the duration of the fade inout animation

5. How to Render the Animation for Instagram

Step 1

To save your animation for Instagram, you need to click on the icon in the upper right corner and select Render Video.

Rendering the video

Step 2

Set the following settings in the Render Video panel: 

  • Format: H.264
  • Size: Document Size
  • Range: All Frames
Setting the parameters for instagram upload

6. How to Replace the Image Used in the Template

Step 1

If you want to change the images used for your animation, Right Click on one of the “Placeholder” layers that we created first, and choose Edit Contents.

Opening the placeholder layer

Step 2

Place your new image above the old one, press Alt-F4 to close the placeholder, and then select Save.

Saving the new image

Awesome Work, You’re Now Done!

In this way, we can create an animated polaroid effect in Photoshop using smart objects, shapes, and image filters.

I hope you’ve enjoyed this tutorial, and feel free to contact me for any help with the tutorial. You can also check my Animated Polaroid Slideshow Instagram Stories Template with a similar effect and an awesome vintage video overlay in my portfolio on GraphicRiver.

httpsgraphicrivernetitemanimated-polaroid-slideshow-instagram-stories23822362

{excerpt}
Read More

Top Programming Blogs to Improve Your Skills

It’s important to follow trends in your field to ensure you’re staying current on standards and protocols and perhaps more so in the field of coding. Programmers of all specialties can benefit from following industry-leading blogs to stay aware of the latest technologies. If you’re a coder of any sort you’ll want to subscribe to …

Top Programming Blogs to Improve Your Skills Read More »

How to Delete a Voicemail Recording You’re Not Happy With

Have you ever called someone, left them a voicemail and then regretted the way you said something, or just wished you could delete or redo the recording for whatever reason?

If it’s a good friend it’s no big deal if you stumble over your words, but with certain people you might care more about leaving a good impression.

I had one of those moments today but then remembered a little trick I learned on how to erase — or rerecord — a voicemail that you’re not satisfied with.

This trick is not iPhone-specific, but it works on AT&T enabled phones at least.

If you realize you’re unsatisfied with a voicemail you’ve just recorded, don’t hang up!

How to delete or re-do a voicemail recording:

  • 1) Without hanging up, go to your iPhone’s keypad.
  • 2) Tap star (*)

Your message will be erased and you’ll be given the option to either rerecord it or hang up. That’s it. No more embarrassing voicemails.

The post How to Delete a Voicemail Recording You’re Not Happy With appeared first on Apple iPhone Review.

How to Delete a Voicemail Recording You’re Not Happy With

Have you ever called someone, left them a voicemail and then regretted the way you said something, or just wished you could delete or redo the recording for whatever reason?

If it’s a good friend it’s no big deal if you stumble over your words, but with certain people you might care more about leaving a good impression.

I had one of those moments today but then remembered a little trick I learned on how to erase — or rerecord — a voicemail that you’re not satisfied with.

This trick is not iPhone-specific, but it works on AT&T enabled phones at least.

If you realize you’re unsatisfied with a voicemail you’ve just recorded, don’t hang up!

How to delete or re-do a voicemail recording:

  • 1) Without hanging up, go to your iPhone’s keypad.
  • 2) Tap star (*)

Your message will be erased and you’ll be given the option to either rerecord it or hang up. That’s it. No more embarrassing voicemails.

The post How to Delete a Voicemail Recording You’re Not Happy With appeared first on Apple iPhone Review.

15 Must-Have Royalty-Free House Music Tracks of 2019

Whilst the video in any multimedia project is important, the background music chosen sets the mood for the entire project. That’s why I’ve collected 15 must-have royalty-free House music tracks from AudioJungle.

Once you’ve selected the song that you’re looking for, pick the specific licence that fits your particular needs and you’re free to use the song in different forms of media.  

1. Robots in Paris

Bouncing basses, chunky beats, and crazy electro synths  make up this hard-hitting royalty-free House music track. This song makes a great addition to any travel video or project where you’re looking to add some energy!

2. Sunset on the Terrace

If the next audiovisual project needs a positive uplifting mood to it, then ‘Sunset on the Terrace’ is a perfect track to add. The melodic plucks, beautiful piano chords, and house beat make for a memorable song. 

3. Uplifting House

After listening to this royalty-free House music track, you’ll feel like anything is possible. Let ‘Uplifting House’ be the anthem to your next multimedia project.

4. Fashion Summer Lounge House

‘Fashion Summer Lounge House’ is not only a great background song to use for a fashion video, but also for any video where you want to create a sense of progression and style. Give this royalty-free House track a listen.

5. Indie House

‘Indie House’ is a track with a unique sound that’ll inspire your audience. Melodic pianos and guitars, tropical house beats, and soothing strings are what you’ll find in this royalty-free track. 

6. Electro Mouse

Inject your next audiovisual project with electro madness. ‘Electro Mouse’ gives your next project an edge and attitude that draws in your audiences attention. 

7. Give Us House

‘Give Us House’ is a classic groovy house club track featuring chunky house drums, a funk guitar, and groovy bass-line. 

8. House Candy #2

This royalty-free House track presents a more laid back vibe that works really well as a background song. Listening to this track makes you feel like you’re taking a walk on a beautiful beach at sunset. 

House Music

9. Disclosure

‘Disclosure’ is a track influenced by the Garage and Deep House genres. Plucky bass-lines, Garage-like drums, and melodic vocal chops characterize this song.  

10. Summer Cocktail

‘Summer Cocktail’ is a groovy little tune that’ll be sure to get catch your audience’s attention. The classic house beat, piano chord progression, and guitars in this song don’t disappoint!

11. Deep Freeze

If you’re looking for a unique House song for the intro of any multimedia project, then use this royalty-free House song. The deep bass-line and quick-paced pluck set the tone for this gritty and exciting tune. 

12. You Bring Me Joy

This uplifting Electro House tune makes a great background track for a variety of videos including vlogs, YouTube videos, and presentations. Give this song a listen and let the good vibes take over.

13. Who Are You

Laidback and dreamy, ‘Who Are You’ is inspired by old school house. This infectious track adds a sense of professionalism to a project. 

14. Wake – Progressive House

This track is perfect for an action scene in your projects. It’s strong, majestic and just a bit on the darker side of House music. You’ll definitely wake up after listening to this song.

15. House Party Dance

Press the Play button and you’ll hear a modern chill house song. Use this royalty-free house track if you are trying to evoke creativity and confidence.

Conclusion

The 15 royalty-free House music tracks mentioned above represent only a fraction of the House music tracks available at AudioJungle.

If none of these House royalty-free tracks are right for your next project, then head on over to AudioJungle and browse through their massive library.

If you are looking to improve your own skills in creating or editing your own music, then be sure to check out all the in-depth tutorials on Envato Tuts+ Music & Audio.

{excerpt}
Read More