In today’s saturated market of audio
plugins it has become increasingly difficult to find something truly
unique. Many of my recent articles have centered around exploring
some of the more interesting and well done programs available and this
article is no different in that respect.
The subject plugin of this tutorial, however, is one that is likely the most interesting in terms of sound design
and packs the most mystique and possibility within an easy to use interface I have seen.
Zynaptiq’s Morph is really like
none-other available. It is simple to use, inexpensive and can
create incredible and unthought-of sonics in the matter of seconds.
Morph takes two streams of audio and combines their various sonic
characteristics to form a hybrid of the two inputs. This hybrid—not a crossfade, but a melding of time, amplitude and frequency attributes—can
be heard throughout any of the numerous transition points available and can be manipulated in a number of ways unique to
Morph‘s parameters.
Setting it up is fairly easy and the
method is slightly different depending on the DAW being used.
Above, I’m using Logic X. I’ve created two audio tracks, the first has Morph
instantiated on it while the second has no plugin and is being sent
to no output. The sidechain of Morph is set to this second audio
track so as to receive both audio streams.
The Interface
The most noticeable aspect of the
interface is the central X-Y pad. This is really the meat of Morph
and serves as both a traditional and morphing crossfader. In each of
the corners is an A or a B which corresponds to the incoming audio
channel.
By placing the X-Y puck over one of these letters, one will
hear that particular audio stream post formant shift …more on that
later.
Moving the puck horizontally produces a more-or-less
standard crossfade between the post formant signals, while moving the puck vertically shapes one input
into the other based on time, frequency and amplitude considerations.
To the left of the X-Y pad is a drop
down menu where one can choose between five possible morphing
algorithms, each with its unique pros and cons depending on input
material.
Classic provides a high frequency resolution while
offering a lower time resolution. I’ve found Interweave to be the
most useful across the board. It offers a higher time resolution
than Classic while not skimping too noticeably on frequency concerns.
Tight
is designed for time resolution and is the best option for transient
heavy audio such as percussion. The Classic (LL) and Interweave (LL)
are low latency versions of their above mentioned counterparts. Both
drop sonic resolution to a degree in order to increase their time
sensing capabilities.
The Formants area allows for formant shifting—the shifting of the resonances of the signal across the frequency spectrum—up and down. This allows one to darken or brighten the output without altering its pitch.
The complexity slider is basically a
resolution knob and dictates how much complexity goes into morphing
the two inputs into one another. The manual gives a good analogy; if
the output can be seen as a computerized hybrid of inputs—think of
video effects of one person’s face morphing into another’s—the
Complexity slider would dictate the number of polygons used to create
that visual output.
In Use
The best part about this plugin is
playing around with it and getting lost in the rabbit hole of
possibilities it offers. One can easily just start throwing audio at
it, play with some sliders and algorithm choices and create
completely unique and strange new sounds at every turn.
Below, I
have a few examples.
This is a synth recording morphed with
an African tribal vocal. It is pretty reminiscent of a vocoder, but
it is much more dynamic in that it retains all of the synth filter
sweeps, etc.
This is the same synth performance
matched with a drum loop. Although shorter in length, you can still hear the key change of the synth. The swells are not as prominent here, however.
Didgeridoo and a tiger growl. This is probably my favorite example in terms of the unique factor. You can see how easy it is to throw random audio together and get something incredibly interesting.
Bubbling water and an electric bass. This one turned out quite a bit different than how I envisioned initially with it sounding better with the bass playing more of a gate roll than a sonic texture.
The Jury
Signed, sealed, delivered, this plugin
takes about ten-minutes to learn fairly well and makes it incredibly
easy to find and swap combinations of sounds to create completely
unique sound effects and musical timbres.
The only real drawbacks I
saw were that it was pretty taxing on my CPU and I would like to see
the Zynaptiq crew try to implement real time MIDI instrument input in
later versions.
That said, for ease of use, price point and
uniqueness factor it is pretty spot on as is.
{excerpt}
Read More