A giant pulsing blacklight for your iPhone or iPod

This has been out for a while, but in the same booth where Engadget found the Watch Your Bag crapgadget there’s a giant blacklight dock that will pulse to the beat. Oh, and it has speakers. You can opt to leave the black light on if you want (no sync to music), or have it strobe. Naturally it’ll work with iPods as well, so you can practically set up a nightclub in an instant. Provided you don’t mind toting a 4-foot iPod dock around. At $149.99 from Sharper Image, I doubt these are flying off the shelves.

A giant pulsing blacklight for your iPhone or iPod originally appeared on TUAW – The Unofficial Apple Weblog on Sat, 14 Jan 2012 16:00:00 EST. Please see our terms for use of feeds.

Source | Permalink | Email this | Comments

TUAW visits Scosche at CES

Yesterday we got a chance to stop by the Scosche booth at CES. While we were there, we got to see all manner of items, from the just released to the recent but also pretty cool. Here’s what we saw:

Kelly’s top pick: A new car charger. Why? It has three very important features all in one convenient package! It is not only a dual USB charger, but both ports will charge iPads, AND it’s the teeny compact style that just barely peeks out of your power port. It’s coming soon, and when it does, I’ll be getting several.

Victor’s top pick: freedomMIC Bluetooth Wireless Microphone. Not only is it a wireless mic that is handy for recording nicer audio when you are shooting with your iPhone, but you can also use it as a remote to start and stop recording, or snap a still photo with your iPhone camera. If you use your iPhone for reporting (as I have done), you’ll find this mic super handy.

We saw a number of other neat things in the Scosche booth as well. We saw a case with two pieces for the iPhone that has a silicone sleeve to protect the back and front of the iPhone, and then an aluminum Element case style band that buckles around it (think springform pan) for extra protection (and aesthetic coolness). This was really neat to see and very sturdy to use, the latch was solid and it really did look sharp on the iPhone. Plus, unlike the Element, you don’t need a tool to get the metal band off.

Also there was a really interesting cable. I know, cables aren’t THAT interesting, and that’s true, until you see one cable transform from one you always have to carry into the other one you always have to carry. Since I basically only need two cables, it was nice to see them both in one. You take the 30-pin end and it lifts up and pivots over, unveiling a micro-USB end as well. Generally I only need to charge on micro-USB, and this way I can have the “emergency” iPhone cable as well without taking up another cable’s worth of space. It’s called the syncABLE Pro.

Speaking of iPhone cables, another nice thing to see was that Scosche has expanded on their line of flipSYNC cables, a compact cable about the size of a car alarm remote that unfolds into a USB charging cable. Now they have the clipSYNC which includes a carabiner-style clip to attach it to your bag, and also a flavor that has a battery in it and is still really compact.

One thing I personally liked a lot about their booth was all of the hands-on they had available. There were a lot of companies with things set up under glass or back on a wall where you couldn’t really get at them, so it was nice to get the chance to touch all of it and really see what it was like.

TUAW visits Scosche at CES originally appeared on TUAW – The Unofficial Apple Weblog on Sat, 14 Jan 2012 15:00:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

Boxee explains dropping PC and Mac clients at CES

We found Boxee at CES’ ShowStoppers event this year, and when we cornered them to complain about dropping official PC and Mac support late in 2011, they were appropriately apologetic. Boxee’s Liz Dellheim said that yes, they’re sorry that they’ve abandoned that part of the company, and says that with just 20 people in their employ, and customers not connecting their PCs up to televisions that much anyway, Boxee just couldn’t justify that support any longer. Instead, the company will focus on providing software for televisions and set-top devices, which Dellheim said offer “a more complete Boxee experience” than having to run inside the OS of a PC or Mac.

That, and Boxee really wants to bring live TV to their service. Licensing that content for a standard PC client would be much harder than a more limited TV service, so Boxee decided to focus in on making the best set-top service they could, rather than being forced to support individual users.

So if you were a big fan of Boxee on your Mac, that’s probably the end of that. The client is still available on the website, but the company isn’t supporting the official release. Fortunately, as we described in the original post, there are quite a few alternatives to look out for.

There is one piece of Boxee software that will be running on an official Apple product: Dellheim confirmed that the Boxee Remote app for iPhone hasn’t been forgotten, and while no big updates are planned, the company will continue to include that bit of the Boxee ecosystem in future plans. It’s good to know that Boxee hasn’t completely abandoned us Apple fans, but yes, for now, the company prefers to build for its own hardware, not our computers.

Boxee explains dropping PC and Mac clients at CES originally appeared on TUAW – The Unofficial Apple Weblog on Sat, 14 Jan 2012 10:00:00 EST. Please see our terms for use of feeds.

Source | Permalink | Email this | Comments

Ten One Design premieres Pogo Sketch Plus and Magnus iPad stand at CES

It’s always great to see the guys from Ten One Design at various trade shows and conventions we cover here at TUAW and seeing them again at CES was no exception. This time around, in addition to displaying the popular Fling joystick for iPhone and iPad, Ten One had two new products on display.

The first as the Pogo Sketch Plus stylus, which is an updating version of the popular Pogo Sketch featuring an all-new tip. Personally, I’m not a huge stylus fan (I agree with Steve Sande: “If you see a stylus, they blew it”), but I do agree that the Plus is more accurate and a little smoother than the previous version. I don’t know that it’ll convince you to use a stylus on the iPhone or iPad when you don’t already, but if you use another stylus or the standard Pogo Sketch, the new version is worth checking out.

Ten One was also showing off the Magnus, a new iPad stand they’re making. iPad stands are so CES 2011, but this one is actually pretty innovative: It includes a strong metal base outfitted with a magnet, so the iPad not only stands in place, but is held there with a magnetic charge (on the same edge that Apple’s Smart Cover uses to stay on. The design of the Magnus is really impressive — the iPad would fall over without that magnet, so the whole thing looks quite magical.

The Pogo Sketch Plus is available for $14.95, and the Magnus is available for $49.95. Of course, it only works with the iPad 2 and its embedded magnet.

Ten One also says the Fling continues to sell well. There are a few other joysticks out there, but Ten One says that no other competitors have borrowed the Fling’s patented twisty design yet. They did say that a few “counterfeit” copies have appeared, but not enough to cause issue with Ten One’s sales. We asked if there have been any major customer complaints yet, or any big improvements in the product customers have asked for, but they say that customers have been happy overall with the Fling. The only real issue so far? “It’s kid-proof, but not dog-proof,” says Ten One.

Ten One Design premieres Pogo Sketch Plus and Magnus iPad stand at CES originally appeared on TUAW – The Unofficial Apple Weblog on Sat, 14 Jan 2012 14:00:00 EST. Please see our terms for use of feeds.

Source | Permalink | Email this | Comments

Open Source: Library For Easy iCloud Image And Document Transfers With A Blocks Based Syntax

I have mentioned some excellent libraries for simplifying the use of the new iOS 5 iCloud feature like this excellent library for synching NSUserDefaults to the iCloud with one line of code, and a library for managing a photo gallery stored in the iCloud.

The functionality of this library is a bit more basic, but like the other mentioned libraries I like how easy it is to use.

This library  allows you you to easily upload images and documents from iCloud with a very clean syntax using blocks.  You can also download images and documents either all at once or by using a specified key.

The library is from @sergimtzlosa and you can find it on Github along with usage examples here.

A nice simple library with some very clean syntax for doing basic uploading/downloading from the cloud.

©2012 iPhone, iOS 5, iPad SDK Development Tutorial and Programming Tips. All Rights Reserved.

.

DeliciousTwitterTechnoratiFacebookLinkedInEmail


GoPano 360 degree camera with new app updates, case at CES

We originally took a look at the GoPano lens attachment from EyeSee360 last year when it was released — the lens sits on the back of your iPhone, and allows you to take a full 360 degree picture with a free iPhone app. Since the project went live (it was funded by Kickstarter), EyeSee360 tells TUAW at CES that it’s sold very well, and there are updates coming for both the product and the app.

For the app, the company is planning an update soon that will add some social sharing options. Already, the app will upload 360 degree video to the main GoPano.com site, which it would like to be seen as “The YouTube of 360.” These videos don’t need an iPhone or any special software to be viewed, so while the original video may be warped (the lens basically shoots a circle of video on the iPhone’s screen, and must be put through the company’s software to be seen correctly) users can both save and share their videos online through the main site.

The app will be updated in a few weeks, however, and that update will bring options to send the videos directly to Twitter, Facebook, or services like Dropbox, so we’ll see more 360 videos than ever online. There will be a Facebook app for embedding the 360 videos, too. “The goal,” according to the rep from EyeSee360, is to eventually “take it to broadcast” television, so the company was also showing off a prototype version of a full lens made for a high-end Red camera as well.

The RED camera rig

Finally, the company is also planning an update to the lens, though all they had to show us so far was a very early model, not anywhere near ready for release just yet. The new model follows what they said was a whole lot of customer feedback — customers are worried that the lens (which currently is just inserted into the custom iPhone case) might fall out, so EyeSee360 is working on a version that instead slides and locks in to a slot over the iPhone’s camera, meaning that even if the phone is moved around, the lens should stay securely fastened on there.

Again, that model isn’t set for release just yet. But it’s clear EyeSee360 has plenty of ideas on how to improve its lens, and plenty of orders post-Kickstarter to fulfill. As more and more users upload and share 360 degree videos created with the GoPano, it’ll be interesting to see where those videos end up and how they’re used in the future.

GoPano 360 degree camera with new app updates, case at CES originally appeared on TUAW – The Unofficial Apple Weblog on Fri, 13 Jan 2012 23:58:00 EST. Please see our terms for use of feeds.

Source | Permalink | Email this | Comments

Incipio shows off licensed, interchangeable, and battery charger cases at CES

Incipio had a nice booth on the show floor at CES this year, and kindly showed TUAW some of its new offerings in the world of iPhone cases and spare batteries. The latest and greatest news from Incipio is licensed cases — the company has secured licenses to print cases with art from Magic: The Gathering, Hasbro, Alpine Stars, and gaming accessory company Gunnar, so we got to see those cases displayed at the show. Incipio told us that while licensed cases don’t normally sell quite as well as plain cases (we heard last year that black is always the best-selling color for iPhone and iPad cases), licenses can often bring in interest to the company, from consumer buyers to retailers and other companies.

Some of the licensed cases from Incipio

Elsewhere in the booth, Incipio was also showing off its popular NGP case, which consists of two different pieces: a hardshell back that fits directly on the iPhone, and then a silicone case that snaps onto that one. Customers have really been drawn to the case, Incipio told us, because it’s pretty easy to remove and change up. That’s a trend they’ve noticed recently: That more and more customers are looking for iPhone cases that can come off easily, either because they want to try on multiple different cases for their iPhone, or just to allow the iPhone to connect to or sit in a dock.

Incipio was also displaying the Off Grid Pro, which is a battery pack that follows up on its Off Grid series. The Off Grid Pro kicks up the juice to 1700 mAh, and it features a very slim set of batteries that can be replaced inside the iPhone case itself. I thought it was surprisingly thin, so users looking for a extra battery boost that doesn’t take up a lot of room might be interested in checking it out. The Off Grid Pro will be out at the end of February for $89.99.

Finally, Incipio showed us a prototype case it was working on that had both rigid and flexible parts. The rigid parts looked like an “X” and reached out to the corners of the iPhone, while the sides were flexible and allows for protection without making the iPhone much larger. That case was still in the making, a designer for the company told us, so it may never actually see store shelves in its current form. But Incipio and all of the other various case companies on the floor at CES are innovating as best they can, trying to both come up with new options and respond to consumer taste as quickly as possible.

A case prototype

Incipio’s cases definitely stood out from the flood of similar accessories at the show this year. And just like last year, it was interesting to hear what kinds of trends and patterns are showing up in the world of iPhone and iPad add-ons.

Incipio shows off licensed, interchangeable, and battery charger cases at CES originally appeared on TUAW – The Unofficial Apple Weblog on Fri, 13 Jan 2012 23:30:00 EST. Please see our terms for use of feeds.

Source | Permalink | Email this | Comments

Moshi releases Clarus headphones at CES

Moshi, makers of a variety of accessories for your Mac and iPhone, have announced a new set of headphones at CES called Clarus. They have two interesting characteristics, one inside the headphones, and one outside.

Outside they are a little different than a number of in-ear style headphones in that they have the ear loop to hang over your ear and keep the earpiece in place. They do offer a few sizes of covers for the earbud itself, which is handy, but even better is that you don’t have to rely on that to hold them in your ear. Made of a semi-rigid material, the loop is soft to the touch and flexes enough to let you wiggle them around to get the perfect fit.

Inside, there is a great big difference: there are two drivers! Generally headphones will have a single driver, and that driver has to be all purpose since there’s only one. This tends to mean you have to choose whether you want clear crisp sound in the high end, or a bumping thumping low end. With two drivers, you no longer have to decide which you prefer. I don’t know how they managed to fit two drivers into these compact little headphones, but I can tell you how happy I am that they managed to do it.

I got to listen to a pair on the floor, and unlike some booths that were using a specific sample or only one variety of sound to show off, I was allowed to plug in my iPhone and play whatever I wanted. First off, putting them on was really easy. That flexibility in the earpiece helped me settle them in, and then I tried samples from four different songs (a mashup, guitar-heavy rock, electronic, and acoustic guitar/piano) and got really impressive results. They were a variety of bitrates, and everything sounded clear and balanced in every sample. It was really nice to get to hear something I was really familiar with so I could tell how it would sound compared to all the other places I listen to the same music.

There are other details that are nice, like the braided cover on the cord, the iPhone mic/control capsule on the cable, and the color detail on the earpiece to help put them in the correct ear. Retail price is $200 and they are available now at Moshi’s website.

More Moshi headphones seen at CES

Moshi releases Clarus headphones at CES originally appeared on TUAW – The Unofficial Apple Weblog on Fri, 13 Jan 2012 22:30:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

IK Multimedia introduces new iRig mic, mixer, and stompbox at CES

IK Multimedia is showing off new products in the North Hall of CES 2012 in Las Vegas this week, and they were one of our first stops around the Las Vegas Convention Center. IK Multimedia is behind the popular Amplitube software, and has seen a lot of success with the iRig guitar port for iOS, and its followup, the iRig mic.

In fact, given all of that success, IK is really going all out with the iRig brand, introducing a slew of new products to both bring audio in and out of iOS devices. The most impressive new tool on display at the show is the iRig Mix, a mobile two-track mixer that’s designed to work with your iPhone or iPad. At its base, this is just a really solid mixer — audio comes in via two 1/8″ jacks at the top, and while those jacks are meant for iPad or iPhone audio, they’ll really work with any input of that kind. Each side of the mixer has separate knobs for gain, treble, and bass, and of course either track can be cued through another headphone jack at the bottom and buttons above each slider. There’s a master volume and sliders for both tracks, and of course there’s a third slider to choose which one (or both) of the tracks is playing.

The really interesting switch on the mixer is something labeled “X-Sync.” This one is designed to work with a new app coming from IK called DJ Rig, which itself will allow you to mix and match two different songs (so technically, you could mix four songs together, with two iOS devices and the iRig mixer). Basically, it will use the DJ Rig app to beat match any audio coming in from one track with the other. So you could have a CD player hooked up to one side, and the DJ Rig app hooked up to the other side, and X-Sync will figure out the beats per minute of the CD player’s song, and command DJ Rig to automatically match it up when mixing. The process is pretty cool, and adds yet another feature to an already very powerful (and relatively tiny) $99 mixer. The casing is plastic, however, so that likely helps keep the cost low.

IK also was showing off the new iRig Stomp at the show — it’s (as you might have guessed from the title) a stomp box that’s designed to work with the iOS version of Amplitube, so on-stage guitarists can control their audio output just by hitting a button with their foot. The Stomp will run about $60, and be available “soon,” according to IK.

Elsewhere at the booth, we also got to see the new iRig Cast, which is a tiny little microphone designed to plug right into the iPhone or iPad’s headphone port. It’s relatively inexpensive, for just $39.99, and has two different settings, depending on whether you’re recording close sound in a loud environment, or louder sounds in a more quiet setting. The Cast also has a headphone port on it so you can listen in while recording, and will work with IK’s VocalLive app, or any other app that accepts audio through the headphone port.

And finally, we were shown the iRig Preamp, which is $49 and should be out in April. It’s pretty simple — a preamp for balanced mic use, which means you can use an XLR mic with your iPhone or iPod touch. The iRig Mic of course plugs right into the phone, but the preamp allows you to go between your own mic and the iPhone or iPad.

iRig Preamp

IK Multimedia has a long history of making audio products, but with these releases, the company has almost completely decided to focus on products compatible with Apple’s iOS devices. As IK’s rep told us, the company now has a full set of gadgets to record a band with, all going into its own iOS apps. The Gorrilaz did just that, in fact. Previously, IK made projects for a niche set of musicians looking for high quality audio software, but with Apple’s App Store and all of the products that have come out of Amplitube for iOS, IK now focuses on a much wider audience of musicians (with iPhones and iPads) of all skill levels and budgets. It’s very interesting to see such an established company get changed so much by the App Store, and I’d doubt this is the last we’ve yet seen of IK’s popular iRig brand.

IK Multimedia introduces new iRig mic, mixer, and stompbox at CES originally appeared on TUAW – The Unofficial Apple Weblog on Fri, 13 Jan 2012 21:30:00 EST. Please see our terms for use of feeds.

Source | Permalink | Email this | Comments

Hidden secret apps of CoreServices

Nestled within the bosom of your Mac’s system folder lie many powerful and curious applications. Not intended for direct access, the denizens of the CoreServices directory work as clients for other OS apps such as System Preferences or Safari. There are several CoreServices apps we use often at TUAW. Here are some of our favorites.

When Safari cannot connect to the Internet, you may be prompted to run Network Diagnostics.app to find the problem. The app lets you choose a network port you wish to work with (Ethernet, Wi-Fi, or an external modem), and test it. It is one of many apps found inside your /System/Library/CoreServices folder. It’s also one that you may want to stick into your dock for a bit when you’re messing around with a new router or have upgraded your cable modem.

Screen Sharing.app gives you remote access to any enabled computer on your local network using the VNC protocol. Some of us prefer using Chicken of the VNC, but Screen Sharing.app is a simple alternative already built into your system.

You enable this feature in System Preferences > Sharing > Screen Sharing (hint, click Computer Settings and add a password). When launched, just enter the host name or address of a sharable computer (e.g. Banana.local or 192.168.0.15) and start controlling that system remotely.

Use the Wi-Fi Diagnostics.app to capture network events and enable debugging logs. It provides a way to collect traffic for analysis.

Anyone who regularly works with Apple development may be pleased to realize they can access the Certificate Assistant.app directly instead of always having to launch the Keychain utility. The assistant allows you to create certificate signing requests, which are used in the dev process to request authenticated items like certificates for development provisions.

The VoiceOver.app utility enables spoken descriptions of your OS X screen. It provides an audio interface for your computer. Once enabled, you can quickly switch out of VoiceOver mode with Command-F5. (You can turn on VoiceOver via System Preferences/Accessibility, as well.

You’re probably used to using the Archive Utility.app through the Finder’s contextual pop-up, but if you drag it into your dock, you can use it as a drag and drop compression utility. Very handy!

Got other favorite secret apps? Tell us about them in the comments!

Hidden secret apps of CoreServices originally appeared on TUAW – The Unofficial Apple Weblog on Fri, 13 Jan 2012 20:30:00 EST. Please see our terms for use of feeds.

Source | Permalink | Email this | Comments

Samsung to release newly-designed Galaxy Tab 7.0N in Germany

Samsung may be bold when it comes to its Apple fanboy commercials, but the handset maker is starting to back down on some of its products. According to BestBoyz.de, the tablet manufacturer is releasing a newly-designed Galaxy Tab 7.0N in Germany that does not infringe on Apple’s patents or trademarks.

The tablet includes a 7-inch Plane Switching LCD panel, 16 GB of internal storage, 3.2-megapixel rear camera with 720P recording, 1.2-megapixel front camera, 1.2 GHz dual-core processor, and Android 3.0.2 Honeycomb. This model is slated for a German only release. It’ll be available in white and metallic grey and will retail for €600 (about $770).

[Via Engadget]

Samsung to release newly-designed Galaxy Tab 7.0N in Germany originally appeared on TUAW – The Unofficial Apple Weblog on Fri, 13 Jan 2012 19:45:00 EST. Please see our terms for use of feeds.

Source | Permalink | Email this | Comments

Apple publishes Supplier Responsibility Progress Report

Apple published its report on how it is monitoring contractors to meet standards of worker protection and responsibility.

Apple reports that it originated 229 audits throughout its supply chain in 2011, up 80% over 2010, with special emphasis on worker safety and working conditions.

The company notes it has required Apple-designed training programs for more than 1 million supply chain employees. Apple has been criticized in the past for not revealing all the supplier relationships it maintains, and the report now shows a list of 156 companies which represent 97% of Apple’s procurement expenditures.

Apple also claims to have made a concerted effort to stop the hiring of underage employees. The audits are said to have resulted in dramatic reductions in underage labor, and the most recent reports says no underage workers were found at final assembly suppliers.

Apple and other consumer electronic product makers have been fiercely criticized about working conditions in the contract plants that assemble electronics products. Monologuist Mike Daisey, who chronicled his observations of labor practices among Apple’s supplier firms in his one-man show The Agony and the Ecstasy of Steve Jobs, is featured on this past week’s episode of PRI’s This American Life, along with the show’s production team’s investigation into his findings.

If you’re interested you can read Apple’s full supplier-responsibility report in PDF form.

Apple publishes Supplier Responsibility Progress Report originally appeared on TUAW – The Unofficial Apple Weblog on Fri, 13 Jan 2012 19:00:00 EST. Please see our terms for use of feeds.

Source | Permalink | Email this | Comments

megaPhone iPhone stand is rubbery, battery-free amplification

Here’s another quickie for you from CES. I’ve seen a few physical amplification attempts, some good, some bad. The megaPhone from iSimple sort of sits in-between. It’s a little rubbery megaphone for your iPhone which provides some acoustic amplification of your iPhone’s tiny speaker. There’s a port for the sync cable, and you can use it in portrait or landscape position.

How does it work? About as well as you might imagine. Enough to boost the sound a bit, but not so much that it’ll fill the room or anything. Still, it’s small (basically you can squish it) and if you need a bit of a boost in your audio without resorting to something like this, the megaPhone may be worth the $14.95 to you. I could see using this to placate the kiddos while waiting for food at a noisy restaurant, and I’m sure there are plenty of other uses for it.

megaPhone iPhone stand is rubbery, battery-free amplification originally appeared on TUAW – The Unofficial Apple Weblog on Fri, 13 Jan 2012 18:30:00 EST. Please see our terms for use of feeds.

Source | Permalink | Email this | Comments

Lantronix xPrintServer brings networked printers within reach of iOS devices

For enterprises and small businesses that are embracing iOS devices to empower employees, printing from those devices can be problematic. The solution for many organizations with scads of networked printers and armfuls of iPads and iPhones is to set up one or more Macs or PCs to handle print sharing via apps like Printopia. The app makes networked printers visible to AirPrint-enabled devices.

To complement the software-only solutions, Lantronix has developed the xPrintServer (US$149.95), a device that automatically discovers networked printers and makes them all available to your iOS devices for quick and easy printing.

Why would you want such a device? Well, to enable printing you could replace all of your existing printers with AirPrint-enabled units, print to shared printers (Mac-only), or use something like Printopia as described above. You could also sync documents to your Mac or PC and then print them, but that’s time-consuming and you need a personal computer available for printing.

The device I received for review was still a beta version, and the company plans to start shipping the real thing sometime in the first quarter. The xPrintServer is about the size and shape of an iPhone, and is plugged into power and an Ethernet connection. At that point, it automatically discovers printers on the network, and then translates the iOS print format to a PDL (page description language) specific to each printer.

How many printers does the xPrintServer support? Well, I didn’t feel like counting, but it’s a very long list — over 4,000 and growing. Considering you can find everything from the Apple ImageWriter to the latest and greatest laser and inkjet printers from major manufacturers on the list, chances are very good that your office printers are covered. Lantronix says that if your printer is not currently on the list, you can email them the brand and model number and they’ll provide support where possible.

The printers need to be network-connected (wireless or wired) with one of three protocols: JetDirect (AppSocket), LPD, or IPP. The iOS devices must be running iOS 4.2 or later, covering the iPad, iPad 2, iPhone 3GS and later, and the iPod touch 3rd-generation and later.

Setup

Setup of the xPrintServer is drop-dead simple. Once you’ve plugged in the power brick and then attach the device to a router, switch or hub, it auto-discovers and auto-provisions the printers. The xPrintServer can’t auto-detect printers that are on subnets different from the one that it’s connected to, but those printers can be added later via the xPrintServer’s web GUI.

A note for our non-North American readers: the xPrintServer comes with a boxful of adapter plugs, so using the device probably won’t require the purchase of a separate adapter.

Once the device is done with the discovery and provisioning, the X on the word Lantronix pulses an orange color. At this point, you’re ready to print. Lantronix notes that the xPrintServer can support an unlimited number of concurrent printers on a network, but recommends one device for every 7 to 10 network printers on the same subnet. That means that in many office buildings, you might need one or two per floor.

Usage

In actual usage, the auto-discovery on a network with a single wireless printer on the same subnet took about 15 seconds. Not bad, considering that there was no other configuration required — the xPrintServer is truly plug-and-play, and even a corporate deployment would be fast to implement. The printer that was discovered is a rather old HP DeskJet 6800 series, and it was up and running quickly.

Printing from both a Wi-Fi connected iPad 2 and iPhone, the print times varied depending on what app I was printing from. In my initial tests, before I updated the firmware on the device, selecting a printer would sometimes take 30 – 40 seconds, and printing would take a while longer. After updating the firmware, selecting the printer and printing a single page took less than 10 seconds.

There was one issue I ran into: although the xPrintServer worked flawlessly in terms of discovery and printing, everything I printed from the iPhone and iPad came out as grayscale on a color printer. Once again, I want to emphasize that this was a beta device. The Lantronix tech support team responded immediately to my queries about this issue, and I expect it to be fixed quickly.

For businesses using a number of xPrintServers, there’s a built-in web-based administrative tool for setting security, naming the devices, installing firmware updates, and capturing diagnostic information. The firmware update process was simple and took about a minute.

Conclusion

Whether you’re a network administrator for an enterprise using a lot of iOS devices and networked printers, the owner of a small business with a couple of printers and a dozen iPads, or even an individual with a several networked printers and a desire to print without keeping a Mac running all the time, you’re going to love this product. Lantronix has done a fantastic job at making the xPrintServer easy to install for the novice, and yet provides enough tools to keep any network administrator happy.

The xPrintServer is available for pre-order now, and will ship later in the first quarter. If my gizmo intuition is correct, Lantronix is going to sell a ton of these things. As they used to say on those late-night TV ads, “order now to avoid bitter disappointment.”

Lantronix xPrintServer brings networked printers within reach of iOS devices originally appeared on TUAW – The Unofficial Apple Weblog on Fri, 13 Jan 2012 18:00:00 EST. Please see our terms for use of feeds.

Source | Permalink | Email this | Comments