In this tutorial I’ll show you how to use Adobe Photoshop to create an emotional fire scene featuring a brave little girl.
First we’ll isolate the model and paint light, color, and shadow for the background. After that, we’ll add the fire, the reflections in the eyes, and the barbed wire, as well as retouching and blending the model. Later, we’ll add the rose and create the fire sparks. We’ll paint the light for the model and use several adjustment layers to enhance the final effect.
If you’re looking for resources, including stock images, textures, and 3D models for your manipulation projects, you can find them all over on Envato Elements or GraphicRiver.
Tutorial Assets
The following assets were used during the production of this tutorial:
1. How to Isolate the Model and Prepare the Base Background
Step 1
Create a new 2000 x 1333 px document in Photoshop with the given settings:
Step 2
Open the model image. Drag the image into the white canvas using the Move Tool (V). Convert this layer to a Smart Object.
Step 3
We need to
isolate the model to be able to work easily in the future. Click the second icon
at the bottom of the Layers panel to add a mask to this layer. On the
layer mask, use the Quick Mask Tool (Q) or any tools you’re familiar
with to isolate the model from the background. You can see the model
with the white background after being masked out.
Hold Control and click the mask thumbnail of the model layer to load her selection.
Press
Control-J to paste the model into a new transparent layer. Right-click
the mask of the original model layer, and choose Disable Layer Mask. Now we
can work on the background behind the model, and the model won’t be affected.
Step 4
Hit
Control-Shift-N to make a new layer. Set this layer between the original
model layer and the extracted one. Activate the Brush Tool (B) and
select a red/orange color (#f95915) to paint over the background. Change
this layer mode to Soft Light 100%.
Step 5
Make
a new layer and use a soft black brush to paint shadow for some areas
on the background. It helps to increase the depth. Change this
layer mode to Soft Light 100%.
2. How to Make the Fire Effect
Step 1
Move the fire image into our main document and place it below the model’s layer. Change this layer mode to Screen 100%:
Step 2
Duplicate this layer and move it to the right. Make it in a lower position to show different flames from the original one.
Step 3
Select the
fire layers and hit Control-G to make a group for them. Set this group’s
mode to Screen 100% and add a Levels adjustment layer to remove the
unwanted white edges. You can see that the fire becomes redder.
Step 4
Add a mask to each of the fire layers to remove some small details in the middle.
Step 5
On each of
the fire layers, go to Filter > Blur > Gaussian Blur and change
the Radius to 15 px. It helps to separate the fire effect from the model
and increase the depth of field.
Step 6
To make the
reflection of the fire in the model’s eyes, use the Lasso Tool (L) to
grab two parts of the fire image and add them to the eyes area. Set the
mode of these layers to Linear Dodge 100%. Remember to place these
layers above the model’s one.
Add a mask to each of these layers and use a soft black brush to remove the unwanted edges outside the pupils’ area.
Step 7
Apply a Gaussian Blur of 8 px to soften the fire’s reflection.
Step 8
Make a new
layer below the model’s one. Use a soft brush with the color #fbe43e to
paint on both edges of the background (the fire area). Change this
layer mode to Soft Light 100% to add more glow to the fire’s effect.
3. How to Import the Barbed Wire
Step 1
Cut out the
barbed wire from the background and place it at the bottom of the canvas. Set
this layer above the model’s one and use a layer mask to remove the
part covering the model so the wires appear behind her.
Step 2
Apply a Gaussian Blur of 15 px to the wire so that it blends well with the softness of the background.
Step 3
Add a part of the wire to the front of the model and make it a bit bigger than the one in the background.
Apply a Gaussian Blur of 9 px to this layer.
Step 4
Create a
group for the wire layers and change the group’s mode to Normal 100%. Use a Hue/Saturation adjustment layer to
desaturate the blue cast on the wire. Bring the Saturation values down
to –100:
Step 5
Add a Color Balance adjustment layer to give the wire some warm red from the fire. Alter the Midtones and Highlights values:
Step 6
Make a
Curves adjustment layer to bring more light to the wire. On the layer
mask, paint on the wire part on the front and the right edges to reduce
the brightness there.
4. How to Retouch the Model
Step 1
On the model’s layer, select the
lips area and make a Hue/Saturation adjustment layer and set it as a Clipping Mask. Adjust the Reds settings to change the
lips’ color, making them redder.
Step 2
Add a Color Balance adjustment layer to give some warm red to the model.
Step 3
Create a
Curves adjustment layer to make the left of the model (from the
viewer) a bit brighter. Paint on the rest of the model so it won’t be
affected by this adjustment layer.
Step 4
Make a new layer, change the mode to Overlay 100%, and fill with 50% gray.
Activate
the Dodge and Burn Tool (O) with Midtones Range, Exposure about 20% to
paint highlights for the contour of the model, as well as more details for the
headscarf. You can see how I did it with Normal mode and the result with
Overlay mode:
5. How to Add the Rose
Step 1
Cut out the rose and place it on the hidden side of the model’s head.
Step 2
Use a Hue/Saturation adjustment layer to change the rose’s color:
Step 3
Add a Curves adjustment layer to darken the rose.
6. How to Create the Fire Sparks
Step 1
Place the
fireworks image onto the whole canvas and change the layer mode to Color
Dodge 100%. Choose Edit > Transform > Rotate 90 Clockwise to
change its perspective.
Add a mask to this layer and remove the sparks covering the model and some bright details.
Step 2
Apply a Gaussian Blur of 12 px to make the effect appear subtle and soft.
Step 3
Add more sparks using the same method. I’ve applied the Gaussian Blur and Motion Blur to this layer.
Step 4
Continue
adding the sparks around the model. Place some big sparks on the front of
the model and apply Motion Blur and Gaussian Blur with the same
settings to make the effect look more dynamic.
7. How to Do the Final Adjustments
Step 1
Make a new
layer on top of the layers and use a soft brush with the color #e97a37
to paint red highlights on the model’s hair. Change this layer mode to
Overlay 100%.
Step 2
On
a new layer, use a medium-soft black brush with the color #f7cf79 to
paint highlights for the model’s contours, the nose bridge and lips. Change
the layer mode to Overlay 100%. Make the left side contours brighter than
the right to fit the main light source.
Step 3
Use a hard brush with the color #cf683d to paint some bright red hair strands around the model’s face.
Step 4
Create a Color Fill layer on top of the layers and pick the color #240203. Change this layer mode to Exclusion 70%.
Step 5
Make a Curves adjustment layer to increase the whole scene contrast. On the layer mask, paint on the background, especially the right so it becomes darker than the foreground.
Step 6
Use another Curves adjustment layer to make the background darker. Paint on the foreground, model and the lower left so they won’t be affected by this adjustment layer.
Congratulations, You’re Done!
I hope that you’ve enjoyed the tutorial and learned something new for
your own projects. Feel free to share your results or leave comments in
the box below. Enjoy Photoshopping!
{excerpt}
Read More