In this tutorial you will learn how to create Latvian signs in Adobe Illustrator and
animate them in Adobe After Effects. To make it more fun, I will show you the basics
of how to create a small motion for your shapes and lines. I will not show you
the whole process, just enough to get you started. I hope you will have
fun and learn something new. So, let’s start!
1. Create the Signs in Adobe Illustrator
Step 1
Let’s start by creating a 1920 x 1080 px document. Go to View > Show Grid. Also select Snap to Grid and Snap to Point.
Go to Edit > Preferences > Guides & Grid and make sure you have the same settings.
Step 2
With the Pen Tool (P) selected, draw a line as shown in the picture
below. Use stroke color #71718E
(2 pt). With a line selected, press R on the
keyboard while holding down the Alt key (you will see three dots) and click in
the middle of the line. This will bring up the Rotate window. Set Angle to
45 and click Copy.
Now, if you hit Control-D, the line will rotate 45 degrees. Continue until
you have a full circle. Group everything (Control-G) and lock the layer.
Create a new layer and then create a shape as shown in the picture below by using
the Pen Tool (P). You will notice how easy it is to draw these shapes when
Snap to Grid and Snap to Point are selected.
With this shape selected, left click on the screen and Transform > Reflect.
Select Vertical and Copy. Holding down the Shift key, hit the Right Arrow on
the keyboard to move the shape. Group both shapes and rotate them the same way
as the lines. Lock the layer and create a new one.
Step 3
Create a 2 x 2 square rhombus shape. Connect the rhombus with the previous
shape with a separate line. It is very important to have every line/shape
separated! Do not join the lines into one shape! This is why we lock the layers—to prevent that.
Group the rhombus with the line and rotate it as before. Fill with color #F9A0AE
. Create a rhombus the same size in the middle of the sign. Fill it with color #96ECE1
.
Using the Pen Tool (P), create a shape like this:
Reflect it vertically and move it on the other side like this.
Group both shapes and rotate them, but this time 90°. The first sign is done!
Step 4
The second sign is basically the middle section of our first sign.
Select it, including the middle rhombus, and duplicate the shape by holding
down the Alt key and dragging it with the mouse. Place it anywhere on the
artboard.
Step 5
Create two small circles (1 x 1 square grid) with stroke colors #FFD17E
and #F9A0AE
. Also create a rhombus with the same color and stroke as before.
Unlock the layers and ungroup the shapes. Place everything in one layer, but
keep the shapes and lines ungrouped. An easy way to do this is by selecting
everything and hitting Control-X to cut and Control-B to place everything back
in one layer. Select the layer and click on Release to Layers.
Now you have all the shapes in separate layers. The last thing to do is to
select all the separate layers except for the first one and drag them to the
top. Name the file Latvian signs and Save.
Now open After Effects.
2. Animation in After Effects
Step 1
To make it more fun, I will show you the basics of how to create a small
motion for your shapes and lines. I will not show you the whole process, just
enough to get you started. Go to Composition > New Composition and create a 1920 x 1080
px file.
Using the Rectangle Tool (Q) draw a background shape. Click Fill and fill with color #F9F9F2
.
Go to File > Import File and locate the Illustrator file we created. At the bottom of the screen you will see Import As. Select Composition Retain
Layer Sizes and click OK.
Drag the Latvian signs composition on top of the background layer.
Double click on the composition to open it—now you can see all the layers we
created in Illustrator.
To make your workflow easier, I would suggest renaming all layers (line
1, rhombus 1, etc.). To do this, right click on the layer and select Rename. You
can also create different colors for layers by clicking on the small square next to the layer.
Step 2
Slide Time Ruler to 2 seconds (or more if you want your movement to be longer), select the shape and hit P to bring up Position settings.
Move the Time Indicator to 0 and click on Time watch beside the Position.
Move the Time Indicator to 1 second and move the selected shape to the left/right.
Move the Time Indicator to 2 seconds and Control-C / Control-V the first key
frame in second 2. Select all key frames and hit F9 to easy-ease key frames.
Hit 0 on the keyboard to see the movement. Repeat these steps for other similar
shapes.
Now select all the layers for the biggest sign, right click and select Pre-compose. Now you have a group that you can copy and rotate.
To rotate a shape, hit R, go to second 0, click on the time watch, go to second 2 or the end of your scene, and change it from 0x to 1x or more, depending on how fast you want your composition to spin!
Copy the compositions to create a pattern effect. Using this method, create a simple animation of shapes moving back and forth.
We Are Done!
Hope you had fun and learned something new—let me know in comments. See you in the next tutorial!
{excerpt}
Read More