Create an Isometric Pixel Art Office Building in Adobe Photoshop

Final product image
What You’ll Be Creating

In earlier tutorials, we created a pixel art character and gave it a car and places to live. Now, let’s give it a place to work.

An office building is a great piece to do in isometric pixel art because you can add as many floors as you’d like and end up with a pretty large building that took about the same amount of work to do as a house or smaller building.

You’ll need to have gone through the Isometric Pixel Art Character and the Isometric Pixel Art House tutorial before proceeding.

1. Dimensions

Let’s make a floor height and footprint that looks congruent with our character.

Step 1

So we’ll use the character as a measuring stick, as usual. Here the height I’ve chosen is 60 px for one floor.

setting the height of the first floor

I like using multiples of 10 px because moving the elements around using the keyboard arrows while holding down Shift happens in multiples of 10 px, so things fall into place much more quickly and easily.

Step 2

Now let’s decide on the width for the entrance part of the building. It will have pretty wide double doors, so the width for the entrance should allow them in with a bit of space around.

I will also be keeping most of these distances in multiples of 10 px, for the reason explained above; it makes things easier later on (and if you’re finicky at all, it feels good to have your distances measured in round numbers).

deciding the width of the entrance

The vertical dashes here are simply being used as guides—we might delete them or draw over them later on, so they’re not necessary but they usually are helpful.

Step 3

The entrance area will protrude a bit, so let’s give it some depth.

giving depth to the entrance

Step 4

Add one more line parallel to the entrance. This will be the glass wall. Together with the entrance they would pretty much make the total width for our building.

making the length of the building

We’ll add some seams to the glass wall—that’s why those dashes are there.

Step 5

Now let’s add more depth: the side wall of the building. It’ll be shorter than the front side.

adding depth to the building

Step 6

Let’s finish the footprint. You can move the guide lines to another layer for a while. Here I closed off the area and filled it with white so that the next steps are a little easier.

building footprint finished

Step 7

Now we duplicate the footprint and move it up to the height we had already decided for the level.

duplicate the footprint

Since the surface was filled with color, we have slightly fewer lines to remove.

Step 8

We still have to remove the rest of the lines that the walls will block.

close the volume off

Add a few vertical corner lines and your volume is complete.

2. Details

Now we’ll take care of most of the coloring and details that the first floor will require, which will stay almost the same for the rest of the floors.

Step 1

Let’s add most of the vertical lines we’ll need: one on each corner and some extra ones for the glass wall panes’ edges.

separate the vertical surfaces

Step 2

Find colors you like for the different sections of the building. I’ve chosen to make the entrance look like concrete. The glass walls are about the same color that was set for windows on the previous house tutorial, and the small area on the edge will be a dark brick kind of color.

color the vertical surfaces

You should try playing with the Hue/Saturation/Brightness sliders to find the final colors.

Step 3

Let’s set a width for the double doors and push that surface a little bit into the volume. As usual, you’ll want to make the peak corners a lighter shade than the walls.

making space for the front door

Step 4

Now we set the height for the doors.

space for the front door

Step 5

And here I’ve done a slightly dark line right next to a slightly light line to look like small grooves—it seems to be common on these kinds of buildings and it makes the concrete walls not too flat/boring.

details on the concrete

We’ll also apply these grooves horizontally, later on.

Step 6

We’ll make the front doors mostly glass, so fill with the same color as the parallel glass wall. Also, add vertical border lines for the doors, one on the inside corner and the other one in the center. To find the center you can measure the whole break in the concrete with the Select Tool (you’ll get the width in the info panel), and then divide that by 2 and you’ll know the distance between the inside corner and where the center corner must go.

glass for the doors

Because the walls around the doors cover part of them, don’t expect both of the doors’ glass rectangles to be the same width.

Step 7

Let’s add a frame around the glass. I’ve chosen a dark grey, with a slightly cool hue.

One pixel of grey was enough vertically. For the bottom line I left 3 px height. Also, add the dark lines between the grey and the glass.

Step 8

Here are the finished doors. I added a small highlight for the bottom part of the grey/metal areas, a few pixels at about the character’s arm height (these are the locks) and a few darker glass lines, for some sort of glass effect.

door frames

Step 9

Now, on to the glass wall. Make the front corner lighter and add an area with a darker shade of the glass color. You can use the Magic Wand Tool to select the white top surface and then move that selection down about 10 px so the selection intersects with the areas of the glass wall you’ll want to paint.

darker areas of glass

Step 10

Finish the lines for all these glass parts. Most corners don’t need to be black, and the seams on the glass should be just slightly darker than the surrounding colors.

finishing the lines for the glass walls

Also, push out the brown wall a bit.

Step 11

Adjust the colors of the brown wall, now that it’s pushed out.

adjust the lighting on the brown wall

The ground floor is almost done.

Step 12

Now copy the level and paste it on a new layer (or Alt-Shift-up arrow) and place it right over the ground floor.

duplicate the ground floor

Step 13

Of course, there won’t be doors on the subsequent levels, so start turning the doors into a window by joining them into one and adjusting the size. Here it’s already a lot shorter, vertically.

start to turn the door into a window

Step 14

There’s no need for the thick bottom edge on the frame, now that it’s a window. Get rid of it and make the window narrower. Make sure to keep it centered; if you make it 12 px shorter on the right, make it 12 px shorter on the left as well.

adjust the width of the window

Step 15

Then finish the areas around the window. Fill in the concrete wall color.

finish the window

Step 16

And make the extra details on the wall. We’ll be adding a few more grooves to the concrete, this time horizontally. Like the previous ones, these are made with one slightly darker shade of wall color, right next to a slightly lighter one. They will need to be applied to both the top and bottom of this level.

finish the walls around the window

Step 17

Now for the glass. We want to keep the seams, but the top and bottom ones are right now in black and we want them with the same color as the rest of the seams.

make the glass walls seamless

Step 18

Finally we’ll do the same with the brown wall, but it’s even simpler for this one as there are no grooves or seams. It’s just a continuation of the same colors. The easiest way to do this fix is with the Magic Wand Tool; selecting all three colors and then Alt-nudging 1 px up and also down.

brown walls also seamless

Step 19

Let’s add a tiny window to this brown wall. It’ll be a nice little accent—the window will be in a different style. Start with a rectangle. If you do it like this, it looks as if it has rounded corners and it seems cleaner.

add window frame

Step 20

Fill the rectangle with dark grey (the same color as in the door), and then add a highlight on the top and a few lines parallel to the top and frontmost edge.

color for window frame

Step 21

Give it some depth. Here I also added a highlight on the bottom border.

depth for small window

Step 22

Add a glass color and a dark line between the glass and metal.

glass for small window

Step 23

And then just duplicate it so it’s also on the ground floor.

duplicate new window

The second floor is complete.

3. Rise

The second floor is in a way like a tile—you could repeat it as many times as you want, and have a 100-floor building if you wanted.

Step 1

But we won’t do 100 floors. For this building, five floors feels about right. Anyway, if the building is too tall and every floor is the same, it kind of wastes illustration space with more of the same.

You can select the second floor layer and press Alt-Shift-up arrow to duplicate it on the fly. Or you could copy/paste, and then just place where it belongs. As I mentioned before, it’s possible to move selections 10 pixels in any direction by pressing Shift and the arrow keys.

multiply the floors

Step 2

We’ll repeat only part of the floor for the top, so that we have a piece of the building that’s there simply to provide access to the rooftop terrace. We only need to bring up the concrete part.

You may want to do this on a new layer.

add final level

Step 3

Finish off the volume.

finish the top volume

Step 4

Add the matching details.

add the necessary details

Step 5

Here I added a small section to top off the little concrete box. It looked to me a little abrupt without it. 

top it off

Step 6

Fill the top with a light shade of the concrete color and fix any lines that may need fixing. We’ll be adding a bit of roof grainy texture, as we did with the apartment building. Start with a rectangle, centered on the top.

making a bit of roof texture

Step 7

Find a color you like for it, and then apply the soft grainy texture and soften the edge.

making a bit of roof texture

Step 8

If we wanted, we could imply the door to the terrace is on the side of the cube that we can’t see, but instead let’s add it to the visible side. We’ll copy the doors we already did and adjust them to this new wall.

copy entrance doors

Step 9

It only needs one door. I kept the little lock visible, and aside from removing one of the doors I also made the one I kept a little narrower.

resize to single door

Step 10

The original door faced the lighter side of the building, so you should adjust the colors to match the new side.

adjust the new door colors

Step 11

Then simply remove the bit of wall below the door.

clean up

Step 12

And to finish the volumes for the terrace, let’s add a railing—it should be about the character’s waist height. Start with the one at the back, and give it the colors of the brown wall.

add terrace railing

Step 13

Then (you might want to put this in a new layer) make the railing go around and on the front edges.

finish terrace railing

Then simply make the borders that come into contact with wall or floor a bit lighter than black.

cleaner lines

And all volumes are complete.

4. Textures

Time to finish our building by adding a few simple textures.

Step 1

This is the texture we’ll add to the brown walls. It won’t be black and white, but to create it, do these lines of 2 px alternating. You can draw just a few pixels and then select and duplicate many times until you cover a large area. You could also do it as a brush by selecting the tile and then going to Edit > Define Pattern.

simple texture

Step 2

Once you have plenty of your texture, you place it in a new layer, covering all brown areas. Ideally the black parts of the texture should go over most of the black lines in the drawing.

laying texture on top

Step 3

Change the opacity of the texture layer to 20%, or as desired.

Shortcut: you can change layer opacities by pressing numbers on the keyboard while the Move Tool is active.

Then on the layers with the brown wall, select all areas of the brown color with the Magic Wand Tool. If you have these areas spread over many layers, you’ll find it useful to set the Magic Wand Tool to Sample All Layers.

select the proper colors

Step 4

Go back to the layer with the texture and invert the selection (Select > Inverse) and delete.

You’ll be left with texture that covers only the walls it’s supposed to.

remove the rest of the texture

Step 5

Now find a color for the rooftop surface.

terrace surface color

Step 6

And let’s make another simple texture. For this surface we’ll do tiles.

Start with a rectangle using a darker shade of the new surface color. Then inside this darker rectangle do another rectangle but with a shade that’s lighter than the surface. Then duplicate and arrange multiple times.

create a simple tile

Step 7

Duplicate until you can cover the whole terrace floor with the texture. The contrast shouldn’t be too high for this tile.

laying tile texture over terrace surface

Step 8

Then repeat the same process as before to cut out the unwanted areas of texture.

removing leftover texture

You can now, if you want, merge all your building layers.

Building Complete!

Congratulations! The office building is done, and now the pixel sky is the limit!

building is complete

{excerpt}
Read More

Leave a Reply

Your email address will not be published. Required fields are marked *